6 Image Vault
®
PRO Command
1 BEFORE INSTALLATION
1.1 Warnings
WARNING: Your new Image Vault DVR is a Personal Computer-based
electronic device. To perform a complete and satisfactory installation,
Image Vault REQUIRES that an Uninterruptible Power System (UPS)
be installed as part of the digital recorder system. The Image Vault
recorder must be the ONLY item plugged into UPS. The DVR must
be plugged into the battery backup segment of the UPS. Failure to
properly install a UPS may cause damage to the system’s hard drive,
resulting in a loss of recorded images, or the inability to record and will
void Image Vault manufacturer’s warranty.
WARNING: Your Image Vault DVR can operate as a stand-alone de-
vice, or may be connected to a playback computer via network or other
means. Regardless of the connection or mounting methods, the case
oftheImageVaultrecordermaynotbemodiedorpenetratedinany
way. Any effort to mount other equipment to the Image Vault, modify
the chassis, or penetrate the chassis in any way will void Image Vault
manufacturer’s warranty.
WARNING: Do not turn off or reboot the DVR while it is in the boot-
up process. Rebooting or turning off while in the boot-up process may
prevent boot-up on next attempt.
1.2 Physical Inventory
You should have the following list of items with the DVR. If any items are missing,
contact your Image Vault distributor immediately.
Blank CD-R Disk
Power Cable
CAT-5 Patch (Peer-to-Peer) Cable
Video/Audio Break-out Cables (Quantity depends on model)
PTZ/AOC Break-out Cable
Mouse
User Guide CD with Playback Software
To Next Page
Loading...