Image Vault PRO COMMAND - Monitor Switch Rate; Use Record Schedule; Audio Recording Options; 7.2 Camera Setup & Forced Recording Options

53 Image Vault
®
PRO Command
Monitor Switch Rate: This is the analog monitor output dwell time as it cycles
between cameras.
Use Record Schedule: Enable to allow forced system recording according to the
Record Schedule. Forced recording requires additional setup (see Section 7.2).
Audio Recording Options: Check “Record Audio at All Times” to enable continu-
ous audio recording. To allow users to listen in real time without recording, check
the “Allow Live Audio” option. The “Use Compression” reduces audio quality to
allow higher transmission speed. Click the “Used Audio Inputs” button to enable
specicaudioinputchannels.Toenableindividualaudioinputsclick“UsedAudio
Inputs” and enable the microphone inputs being used. Warning: Many jurisdic-
tionsrestricttheuseofaudiorecording.Youwillberequiredtoacknowl-
edge a legal disclaimer if you enable any audio features.
7.2CameraSetup&ForcedRecordingOptions
AccesstheCameraCongurationdialogbyselecting“CameraSetup”fromthe
Statusmenu.Fromthisdialogyoumaycongurecameranames,capturerate
and resolution and PTZ protocol. From this dialog you also set forced recording
options and covert camera display options. By factory default all forced recording
is turned off and motion detection is enabled on all cameras.
Naming Cameras: Select and name each camera for easy future reference.
System Forced Recording: Enable “Auto-Detect Cameras” to force all cameras
to record at all times. This will force all cameras found to record and will disable
reporting of camera signal loss. If the “System Record Schedule” (Section 7.1) is
enabled, enabling the Auto-Detect feature will force all cameras to record during
thespeciedperiod.
CameraSpecicForcedRecording:Enable(bycamera)“ManuallyCongured”
to force that camera to record at all times. Enable “Use a Record Schedule” and
set the Record Schedule as desired to force the camera to record based during a
specicperiod.
Record During Remote Connection: Enable (by camera) if you want to force
recording whenever a remote connection (PRO-Command) is in progress. The
advantage is the guaranteed ability to view live images in nearly real time from
a remote location. The disadvantage is potentially unnecessary recording of im-
ages.
Frame Rate: Set (by camera) how fast the DVR captures images. Use the lowest
acceptable Frame Rate for normal operation to maximize total storage time on
your DVR. If the total Frame Rate you setup is higher than the DVR actually sup-
ports, the DVR will capture as fast as it can and divide the capture rate propor-