Image Vault PRO COMMAND - External Input Configuration Details

58 Image Vault
®
PRO Command
Using External Inputs:Selecttheinputnumbertocongureandenable“Use
ThisEvent.”Enterameaningfulnameinthe“InputName”eld.Enableallcam-
eras you want to have record when the contact is triggered. To restrict the hours
when the input is active adjust the “Event Schedule” as desired.
Pre/Post Recording Time: “Event Duration” is how long after the contact returns
tonormaluntilthespeciedcamerasstoprecording.Enable“UsePre-Event”
recording and enter a time to record images captured immediately before each
event.
Capture Rate: Use the “Override Capture Rate” to cause faster than normal
recording while the contact input is active.
Audit Entries: Every time contact activity is detected an audit entry will be gener-
ated if you enable “Add an Audit Trail Entry.” Use the “Audit Schedule” to limit
audit entries to only those hours when you want to track activity.
Normal Contact Condition:ContactinputsmaybeconguredasNormally
Open or Normally Closed.
Audio Recording: You may enable audio recording when the event is detected.
Associating a Camera with an Input for Audit Trail Purposes: Select the cam-
era you want to have associated with the input when viewing audit entries. The
camera selected will appear automatically when you double-click an audit entry.
This should be one of the cameras you select for recording based on this input.
Monitor Alarm: The “Monitor Alarm” feature will cause the local VGA monitor to
gofullscreenonaselectedcamera(LiveMonitorModeonly)foraspecictime
whenever a contact input event is sensed.
Automatic PTZ Presets: Up to four PTZ cameras may be moved automatically
using this feature (PTZ cameras at addresses 1 through 4). Select each camera to
be moved then enter the preset number and period for up to four preset activa-
tions.