IMS ROBOTICS MICRO S - Page 70

MICRO S automatic Cutter motor
Number:
RH-11.014 A
Scope:
IMS Robotics
Document Management
Date:
08 July 2022
Author:
00145
Checked:
Page:
70 of 113
4. Tighten the cable entry again.
5. Apply contact treatment grease to the contacts
and the slip ring.
For example: RS 566-730 made by RS PRO
Caution
Always use a new crimping rubber (013 02 020) each
time you replace the cable.
Achtung
Seit 01.09.2021 wird ein neuer Deckel für die
Kabelverschraubung verwendet (045 01 149)