Inficon 3000 Micro GC - Carrier Gas Weldment

3 - 17
PN 074-519-P1C
3000 Micro GC Operating Manual
3.4.5 Carrier Gas Weldment
The carrier gas weldment connects the carrier gas to each module. It consists of a
base plate and stainless steel tubing. Base plates align to each module.
NOTE: See section 8.2, Remove and Replace a 3000 Micro GC Module, on page
8-5 for more information about how to align a module.
Figure 3-19 Carrier gas weldment
Base plate