Inficon 3000 Micro GC - Installing the Pressure Reducer and Genie Filter Assembly; Tools Required; User Supplied Parts; Genie Filter Assembly

5 - 12
PN 074-519-P1C
3000 Micro GC Operating Manual
5.1.5 Installing the Pressure Reducer and Genie Filter Assembly
The Pressure Reducer and Genie Filter Assembly (G2816A) provides a pressure
reducing function and a gas-liquid separation through a Genie filter. It is not
compatible with other sample conditioners mounted on the 3000 Micro GC front
panel. See Table 5-4 and Figure 5-15 for G2816A kit content.
Figure 5-15 Pressure reducer and Genie filter assembly kit
5.1.5.1 Tools Required
 5/16 in. open-ended wrench
 7/16 in. open-ended wrench
 1/4 in. open-ended wrench
5.1.5.2 User Supplied Parts
 Vent tubing, if used
 Fittings for vent tubing, if used
 1/8 in. female national pipe thread (NPT) fitting
 Sample input tubing and fittings
Table 5-4 Pressure reducer and Genie filter assembly kit contents.
Description Quantity
Outlet tube 1 ea
Genie filter assembly 1 ea
1/4 in. male nut and ferrule set 1 ea
5/16 in. female nut and ferrule set 1 ea
Replacement membrane filters (5/pk) 1 ea
Replacement membrane
filters
Nut and ferrule sets
PN G2816A
Genie filter
Pressure reducer