Inficon 3000 Micro GC - Identification Number

3 - 26
PN 074-519-P1C
3000 Micro GC Operating Manual
3.7.4 Identification Number
Each instrument is uniquely identified by an identification number (ID:).
See Figure 3-31.
Figure 3-31 3000 Micro GC identification number format
 CN Prefix: a fixed two digit prefix and is the same for every instrument
 Hardware Identification
 0 indicates the module is equipped with Standard D-board
 1 indicates the hardware is an instrument
 2 indicates the module is equipped with Enhanced D-board
 Manufacturing Year: a two digit year
 For instance, 2014 is represented as 14
 Manufacturing Week Number: is a two digit week number
 For instance, the first week in January is represented as 01
 Incremental Number: is based on Manufacturing Week and is a three digit
number
 For instance, the first instrument manufactured in a week is
represented as 001.