Inficon 3000 Micro GC - Installation for 3,4-Channel 3000 Micro Gcs

5 - 27
PN 074-519-P1C
3000 Micro GC Operating Manual
WARNING
Keep the power supply block away from gas inlets or
other areas where gas may collect or leak.
3 Fasten the power supply cable to the heated sample introduction accessory.
Connect the power supply to a power source. See Figure 5-35.
Figure 5-35 Connecting the power cord
4 Turn 3000 Micro GC on.
5.1.6.4 Installation for 3,4-Channel 3000 Micro GCs
Installation for the 3,4-channel 3000 Micro GC is essentially identical to that of a
1,2-channel 3000 Micro GC, except that the mounting bracket is longer. See
Figure 5-36 and Figure 5-37.
Figure 5-36 3000 Micro GC, 3,4-channel 3000 Micro GC, front view
Figure 5-37 Example of G2846A-X heated vaporizer installed on a 3,4-channel 3000 Micro GC
Attach power
supply cable
G2819A-X
G2846A-X on a 3,4-channel 3000 Micro GC