Inficon 3000 Micro GC - Installing Pressure Reducer Accessories

5 - 8
PN 074-519-P1C
3000 Micro GC Operating Manual
5.1.4 Installing the Pressure Reducer
The Pressure Reducer (PN G2815A) provides a pressure reducing function. It is
not compatible with other sample conditioners mounted on the 3000 Micro GC
front panel.
Figure 5-8 Pressure reducer kit
5.1.4.1 Tools Required
 5/16 in. open-ended wrench
 7/16 in. open-ended wrench
 1/4 in. open-ended wrench
5.1.4.2 User Supplied Parts
 Vent tubing, if used
 Fittings for vent tubing, if used
 Sample input tubing and fittings
Table 5-3 Pressure reducer kit contents.
Description Quantity
Outlet tube 1 ea
Flow controller 1 ea
1/16 in. nut and ferrule set 1 ea
1/16 in. female nut
and ferrule set
Outlet tube
Pressure reducer
PN G2815A