Inficon 3000 Micro GC - Standard Modules Table

11 - 5
PN 074-519-P1C
3000 Micro GC Operating Manual
11.2.3 Standard Modules Table
To order a replacement Standard GC module, contact INFICON with the New or
Refurbished Module Part Number specified in Table 11-2.
NOTE: If the reference number is not listed in the table, see section 11.2.6,
Discontinued Module Replacement IPNs, on page 11-14.
Table 11-2 Standard modules table
Reference
Number on Top
of GC Module
New Module
Part Number
Refurbished
Module Part
Number
Injector
Type
Analytical
Column
Analytical
Column
Length
Pre-Column Pre-Column
Length
G2801-60100 GCMOD-01 G2801-69100 1.0 µL
BackFlush
PLOT-U 8 m PLOT-U 1 m
G2801-60502 GCMOD-03 G2801-69047 1.0 µL
BackFlush
PLOT-U 8 m PLOT-Q 1 m
G2801-60503 GCMOD-04 G2801-69048 0.4 µL
BackFlush
Alumina
0.32 mm
10 m Alumina
0.32 mm
1 m
G2801-60506 GCMOD-05 G2801-69001 1.6 Fixed
Vol.
PLOT-U 8 m
G2801-60507 GCMOD-06 G2801-69002 1.6 Fixed
Vol.
OV-1,
1.2 µm
4 m
G2801-60508 GCMOD-07 G2801-69003 1.6 Fixed
Vol.
OV-1,
1.2 µm
8 m
G2801-60509 GCMOD-08 G2801-69004 1.6 Fixed
Vol.
OV-1,
2.0 µm
6 m
G2801-60511 GCMOD-10 G2801-69006 1.6 Fixed
Vol.
Alumina 10 m
G2801-60512 GCMOD-11 G2801-69007 1.6 Fixed
Vol.
PLOT-Q 8 m
G2801-60513 GCMOD-12 G2801-69008 1.6 Fixed
Vol.
PLOT-U 4 m
G2801-60514 GCMOD-13 G2801-69009 1.6 Fixed
Vol.
PLOT-U 6 m
G2801-60516 GCMOD-14 G2801-69011 1.6 Fixed
Vol.
Stabilwax 10 m
G2801-60520 GCMOD-15 G2801-69520 1.0 µL
BackFlush
MolSieve 30 m PLOT-U 3 m
G2801-60535 GCMOD-16 G2801-69012 Variable
Vol.
OV-1,
2.0 µm
8 m
G2801-60536
GCMOD-17 G2801-69013 Variable
Vol.
PLOT-U 8 m
G2801-60537 GCMOD-18 G2801-69014 Variable
Vol.
OV-1,
1.2 µm
4 m