6 tirb45e1 (2019-02) CDGxxxDxx.cp
4.7.20 Configure Device 30
4.7.21 Information Device 31
4.7.22 Command Zero Adjust 32
4.7.23 Full Scale Adjust 32
4.7.24 Device Reset Command 33
4.7.25 Exception Reset Command 33
4.7.26 Store Parameters Command 34
4.7.27 Calculate Checksum Command 35
4.7.28 Load Parameters Command 36
5 Object Structure CDG045Dhs, CDG100Dhs, CDG160Dhs, CDG200Dhs 37
5.1 Object Dictionary structure 37
5.2 Communication Profile Objects (0x1000…0x1FFF) 38
5.2.1 Process Data Objects (PDO's) 38
5.3 Manufacturer-specific Profile Objects (0x2000...0x5FFF) 39
5.3.1 Manufacturer Status 39
5.3.2 Manufacturer Configuration (Module 1) 40
5.3.3 Manufacturer Configuration (Module 2) 40
5.4 Input Area (0x6000…0x6FFF) 41
5.4.1 Input Common 41
5.4.2 Input Capacitance Diaphragm 41
5.4.3 Input Common 42
5.4.4 Input Piezo 42
5.4.5 Input Trip Point 1 42
5.4.6 Input Trip Point 2 43
5.5 Configuration Area (0x8000…0x8FFF) 43
5.5.1 Configuration Capacitance Diaphragm 43
5.5.2 Configuration Trip Point 43
5.5.3 Configuration Trip Point 1 44
5.5.4 Configuration Trip Point 2 45
5.6 Information Area (0x9000…0x9FFF) 47
5.6.1 Information Common Capacitance Diaphragm 47
5.6.2 Information Capacitance Diaphragm 48
5.6.3 Information Common Piezo 48
5.6.4 Information Piezo 48
5.6.5 Information Trip Point 1 / 2 49
5.7 Device Area (0xF000...0xAFFF) 49
5.7.1 Semiconductor Device Profile 49
5.7.2 Module Profile List 49
5.7.3 Exceptions 49
5.7.4 Active Exception Status 49
5.7.5 Active Device Warning Details 50
5.7.6 Active Device Error Details 50
5.7.7 Active Global Device Warning Details 51
5.7.8 Active Global Device Error Details 51
5.7.9 Latched Device Warning Details 52
5.7.10 Latched Device Error Details 52
5.7.11 Latched Global Device Warning Details 53
5.7.12 Latched Global Device Error Details 53
5.7.13 Device Warning Mask 53
5.7.14 Device Error Mask 53
5.7.15 Global Device Warning Mask 54
5.7.16 Global Device Error Mask 54
5.7.17 Manufacturer Information Device 54
5.7.18 Trip Point Output All 54
5.7.19 Input Latch Local Timestamp 54
5.8 Configure Device 55
5.8.1 Information Device 56
5.8.2 Command Zero Adjust 57
5.8.3 Full Scale Adjust 57
5.8.4 Device Reset Command 58
5.8.5 Exception Reset Command 58
5.8.6 Store Parameters Command 59
5.8.7 Calculate Checksum Command 60
5.8.8 Load Parameters Command 61
Appendix 62
A: Overview Setting Trip Points 62
B: Literature 64
For cross-references within this document, the symbol (→ XY) is used, for cross-
references to further documents, listed under literature, the symbol (→ [Z]).
To Next Page
Loading...
