3270
Interface
1
(from page 58)
Print
Language
See the following
page.
Print Character
Table
Mono/Dual
Case
Dual Case*
Mono Case
Format
Control
Disable*
Enable
NOTE:
* = Factory Default
1
This menu appears only if the TN5250/3270 option is
installed.
Override
Host
Not Send to Host*
Send to Host
Intervention
Required
Compatibility
Options
Maximum
Printable Width
13.2 inches*
13.6 inches
Disable*
Enable
Hex Transparent
Control
Lead-In Characters
Set 1 <%>*
Set 2 ¬¬$
Set 3 _%_
User Defined
User Defined Codes
Start Code 1
5F*
40-FF
Start Code 2
5F*
40-FF
Stop Code
5B*
40-FF
Alternate Set 80-9F
Printable*
Control Code
Undefined
Char Sub
60*
40-FE (HEX)
Print Text
Direction
Left To Right*
Right To Left
See page 112
Standard Print Language*
Alt Print Language
Disable*
Enable
Active Print
Language
Early Print
Complete
To cycle through the menus and its
options, press MENU then:
To enter a menu or select menu options,
press ENTER.
To return to a previous menu level,
press RETURN.
To exit the configuration menus
and return to READY, press START.
↑
Scroll/
Micro
↓
Scroll/
Micro
OR
To Next Page
Loading...