94
Chapter 4
Coax Interface Menu
Compatibility Options Menu
The Compatibility Options menu allows you to select special printer functions
in the non–SCS mode, based on the capabilities of the printer emulated.
Compatibility Option 1:
Carriage Return at MPP+1
MPP is Maximum Print Position, which is also known as line length. OPTION
1 controls a carriage return at the end of a print line and at MPP+1.
•
ON (the default). Produces a carriage return to the first print position of
the next line.
•
OFF. Produces a carriage return to the first print position of the current
line.
Compatibility
Options
(from page 85)
Compatibility
Option 1
On*
Off
Compatibility
Option 2
On*
Off
Compatibility
Option 3
Off*
On
Compatibility
Option 4
On*
Off
Compatibility
Option 6
Off*
On
Compatibility
Option 5
Off*
On
Compatibility
Option 7
Off*
On
Compatibility
Option 8
Off*
On
Compatibility
Option 9
On*
Off
Compatibility
Option 10
Off*
On
(3287 only)
(SCS data stream only)
(4234 only)
To cycle through the menus and its
options, press MENU then:
To enter a menu or select menu options,
press ENTER.
To return to a previous menu level,
press RETURN.
To exit the configuration menus
and return to READY, press START.
↑
Scroll/
Micro
↓
Scroll/
Micro
OR
* = Factory Default
To Next Page
Loading...