InfoPrint 6500 - Adapter Parameters Submenu

118
Chapter 4 Network Setup Menu
DHCP
You can enable/disable the DHCP protocol using this option, but consult your
administrator for the appropriate setting. The options are:
• Disable (the default)
• Enable.
Adapter Parameters Submenu
Adapter
Parameters
(from page 116)
Buffer Size in
Kbytes
16*
1-15
NetBIOS
Protocol
Enable*
Disable
Ethernet
Hotport
Trickle Time
1/4 Sec.*
1/2 Sec
1 Sec
2 Sec
4 Sec
8 Sec
16 Sec
Off
Timeout
10 Sec.*
10 Sec. - 60 Sec.
Report Status
Disable*
Enable
ASCII Data
Port Number
9100*
1023 - 65535
Keep-Alive
Timer
3 Minutes*
2 - 10 Min
Ethernet
Speed
Auto Select*
10 Half Duplex
10 Full Duplex
100 Half Duplex
100 Full Duplex
Job
Control
Standard*
Enhanced
Off
* = Factory Default
IPDS Data
Port Number
5001*
1023 - 65535
Novell
Protocol
Enable*
Disable
Nest Serv
Type
Auto*
Bindery
NDS
Novell
Frame
Auto Sensing*
Ethernet II
Ethernet 802.3
Ethernet 802.2
802.3 SNAP
To cycle through the menus and its
options, press MENU then:
To enter a menu or select menu options,
press ENTER.
To return to a previous menu level,
press RETURN.
To exit the configuration menus
and return to READY, press START.
↑
Scroll/
Micro
↓
Scroll/
Micro
OR