Loading a Used Ribbon
17
Loading a Used Ribbon
You can take the ribbon cartridge off the printer and reload it at a later time.
The ribbon life gauge automatically updates to reflect the correct remaining
capacity.
NOTE: Since the ribbon usage information is stored on the ribbon cartridge,
you can reload a partially used cartridge onto a different printer.
Consumable Monitoring with the Printer Management Utility
The CRS works with the Printer Management Utility (PMU). The PMU allows
a system administrator to remotely view the current consumable status of all
printers. The PMU can be configured to deliver alerts on all consumable
warnings. When a ribbon reaches the low state, the PMU notifies the system
administrator remotely via an automated e-mail alert of the low condition. This
allows corrective action to be taken before the ribbon reaches its end of life. If
the ribbon is not changed, an alert will again be initiated once the ribbon
reaches the 0% end point. Refer to your Printer Management Utility User’s
Manual for details.
Standard Capabilities
The 6500-V printer family has the following general characteristics:
•
A broad range of print speeds in both cabinet and pedestal models
•
Support of similar features across the entire product line to allow
maximum flexibility in matching the printer to the requirements
•
Energy Star compliant
The following sections summarize the standard capabilities of the InfoPrint
6500-V printers.
Host Computer Interfaces
•
RS 232 Serial
•
RS 422 Serial
•
PC Parallel
•
Dataproducts Parallel
•
Ethernet Interface
•
IEEE 1284
Coax/Twinax features are available with this printer:
•
Coax/Twinax
To Next Page
Loading...