305
C
Host Attachment
Host Attachment
The following paragraphs provide information that will help you plan your
attachment of this printer to your system. Refer to
for special system
requirements.
This printer attaches to the following host devices and workstations:
•
IBM iSeries Host Systems (formerly AS/400) – Parallel Port and Twinax
Interface
•
IBM zSeries Host Systems (formerly VM, MVS, VSE) – Coax Interface
•
IBM 3174 Controller – Asynchronous Emulation Adapter
•
Personal Computer Systems – ASCII Serial or Parallel port
•
IBM pSeries (formerly RS/6000) – ASCII Serial or Parallel port
•
Non-IBM systems that support ASCII attachments through the following
interfaces: EIA-232-E Serial, EIA-422-B Serial, PC Parallel, Dataproducts
Parallel, and IEEE 1284 Parallel
•
Ethernet and Token Ring LANs via the Network Print Server features
•
Ethernet LANs via the 6500-V Ethernet feature
NOTE: When a coax/twinax feature is installed, it attaches to host devices
and workstations that support coax/twinax.
To Next Page
Loading...