44
Chapter 3
Printing the Current Configuration
Printing the Current Configuration
The second method for printing the current configuration, as well as several
other configurations, is to use the Print Custom Set Values menu option,
shown on the following page.
Step Key LCD Result Notes
1. Make sure the printer is on
2. Press NOT READY The printer must be in NOT
READY mode to print the
configuration.
3. PRESS START TO PRINT
PRESS STOP TO EXIT
You are prompted to press the
Start key before the
configuration prints.
4. NOT READY Indicates that the configuration
has printed. Date and store the
printout in a safe place. You may
also want to label the printout
(e.g. “Configuration for 2-up
Labels”).
5. READY The printer is READY for normal
operation.
To Next Page
Loading...