InfoPrint 6500 - Print Format Menu

200
Chapter 4 Emulation Configuration Menu
Print Format Menu
Print
Format
(from page 152)
Characters
Per Inch
10.0 Characters Per In
12.0 Characters Per In*
13.3 Characters Per In
15.0 Characters Per In
16.7 Characters Per In
17.1 Characters Per In
3
18.0 Characters Per In
20.0 Characters Per In
3
Lines
Per Inch
6.0 Lines Per Inch*
8.0 Lines Per Inch
10.3 Lines Per Inch
3
3.0 Lines Per Inch
4.0 Lines Per Inch
Forms
Width
Forms Width in Inches
1
13.6 Inches*
00.1 - 13.6 Inches
Forms Width in MM
1
345.4 MM*
.1 - 345.4 MM
Forms Width in Characters
132 Characters*
2
1 - 272 Characters
Print
Quality
DP Quality*
Near Letter Quality
OCR A
3
OCR B
3
Draft
NLQ Sans Serif
3
Forms
Length
Forms Length in Inches
1
11.0 Inches*
00.1 - 24 Inches
Forms Length in MM
1
279.4 MM*
000.1 - 609.6 MM
Forms Length in Lines
66 Lines*
1 - 192 Characters
Print Character
Table
Print
Attributes
Proportional Spacing
Disable*
Enable
Italic Print
Disable*
Forward Slant
Backward Slant
Slashed Zero
Disable*
Enable
Text Position
Bottom of Line*
Top of Line
UTF-8
Disable*
Enable
Margins
Left Margin
1
0 Characters*
1 - 369 Characters
Right Margin
1
0 Characters*
1 - 369 Characters
Bottom Margin
0 Lines*
1 - 451 Lines
NOTE:
* = Factory Default
1
These variables are not available with the Coax/Twinax
emulation selected.
2
To select forms width in characters greater than 136
characters for coax/twinax, you must first change
maximum printable width to 13.6 inches.
3
Does not apply to IPDS.
Perforation
Skip
1
Disable*
1/2 Inch
2/3 Inch
5/6 Inch
1 inch
To cycle through the menus and its
options, press MENU then:
To enter a menu or select menu options,
press ENTER.
To return to a previous menu level,
press RETURN.
To exit the configuration menus
and return to READY, press START.
↑
Scroll/
Micro
↓
Scroll/
Micro
OR