InfoPrint 6500 - Running the Printer Self-Tests

Interior Cleaning
237
Running the Printer Self–Tests
Step Key Result Notes
1. Make sure that the ribbon is installed and the printer is powered on and loaded with paper.
2. Press NOT READY Places the printer in NOT
READY mode.
3. OPERATOR MENU
UNLOCKED
Press both keys at the
same time. Unlocking the
Operator Menu allows you
to test your printer.
4. OPERATOR MENU
PRINTER CONTROL
First of the series of
configuration menus.
5. OPERATOR MENU
OPERATOR PRINT TESTS
Advances to the
OPERATOR PRINT
TESTS menu.
6. OPERATOR PRINT TESTS
PRINTER DEMONSTRATION*
Advances to PRINTER
DEMONSTRATION, the
first option in OPERATOR
PRINT TESTS menu.
7. OPERATOR PRINT TESTS
[TEST NAME]
Cycles through the list of
print tests until you reach
the name of the test you
wish to run.
8. OPERATOR PRINT TESTS
[TEST NAME]
The print test you have
selected starts printing at
either 80 or 136 columns,
as specified.
STOP
RETURN ENTER
+
MENU

SCROLL/
MICRO
UNTIL
ENTER

SCROLL/
MICRO
UNTIL
ENTER
Printer Self – Tests