124
Chapter 4
Network Setup Menu
Buffer Size in Kbytes
This parameter determines the size of the input buffer, in 1K increments. A
selection of up to 16K is shown.
•
16K (the default)
•
1 – 16.
•
NDS.
NetBIOS Protocol
This option determines whether the NetBIOS protocol will be available. The
selections are as indicated below:
•
Enable (the default). Makes the NetBIOS protocol available with the
integrated ethernet installed.
•
Disable. Make the NetBIOS protocol unavailable during printer operation.
ASCII Data Port Number
This option sets the port number for ASCII print jobs. The data port number
needs to match your host system setting.
•
9100 (the default)
•
1023 – 65535
IPDS Data Port Number
This option allows you to set the port number for IPDS print jobs. The port
number needs to match your host system.
•
5001 (the default)
•
1023 – 65535
Keep-Alive Timer
This is the time that the Keep Alive Timer will run. With the Keep Alive Timer
on, the tcp connection will stay connected even after the print job has
terminated.
•
3 Min (the default)
•
2 – 10 Min
To Next Page
Loading...