132
Chapter 4
Network Setup Menu
Kerberos Enable
•
Disable (the default). Disables Kerberos authentication in the wireless
network interface.
•
Enable. Enables Kerberos authentication in the wireless network
interface.
Kerberos Password
•
Kerberos Password (01-15). The first 15 characters of the Kerberos
password (maximum number of characters is 40).
•
Kerberos Password (16-30). Characters 16 to 30 of the Kerberos
password (maximum number of characters is 40).
•
Kerberos Password (31-40). Characters 31 to 40 of the Kerberos
password (maximum number of characters is 40).
Reset Kerberos Password
Resets the Kerberos password to an empty string.
KDC Port Number
KDC (Key Distribution Center) port number is the 2-byte UDP/TCP port used
for Kerberos Communication.
The range is 0-65535, and the factory default is 88.
Clock Skew
Sets the maximum allowable amount of time in seconds or minutes that
Kerberos authentication will tolerate before assuming that a Kerberos
message is valid. The range for Seconds is 60-900, and the default is 300.
The range for Minutes is 1-15, and the default is 5.
Ticket Lifetime
Sets the maximum allowable amount of time in Seconds, Minutes, Hours, or
Days that a ticket obtained from the Kerberos server is valid before getting a
new one.
•
Ticket Lifetime Units
•
Seconds. The range is 300-259200, and the default is 43200.
•
Minutes. The range is 5-4320, and the default is 720.
•
Hours. The range is 1-72, and the default is 12.
•
Days. The range is 1-3, and the default is 1.
•
Ticket Lifetime (Sec). The ticket lifetime unit in seconds. The default is
43200.
NOTE: The submenu selected in Ticket Lifetime Units will display on the
Ticket Lifetime (SEC) menu. For example, if you select Hours, the
Ticket Lifetime (SEC) menu name will change to Ticket Lifetime (HR).
To Next Page
Loading...