172
Chapter 4
Emulation Configuration Menu
Select Font
This parameter allows you to select a font for the IGP feature. Valid selections
are 0 to 33. The following predefined values are available:
0 U.S. ASCII (the default)
1German
2 Swedish
3Danish
4 Norwegian
5 Finnish
6 English
7Dutch
8 French
9 Spanish
10 Italian
11 Turkish
12 Japanese
13-23 Reserved
24-31 User Defined Sets
32 0858 PC Euro Multilingual
33 0923 Latin 9 8859-15
Values 14-23 are undefined and will default to 0. You can set values 24-31 to
specific fonts; refer to the USET command.
Slash 0
This option allows you to select is zeros will print with or without a slash (Ø).
•
Disable (the default). Prints zeros without a slash (0).
•
Enable. Prints zeros with a slash (Ø) to distinguish zeros from the
alphabetical capital “O.”
Lines Per Inch
This is the number of lines to be printed per inch. For example, at 6 lpi there is
1/6-inch from the top of one print line to the top of the next print line. The
following number of lines per inch may be selected:
•
6 (the default)
•
8
•
9
•
10
Mono/Dual Case
This parameter enables the printer to print text in all uppercase when using
the ALPHA command.
•
Dual Case (the default). The printer will print text in upper- and
lowercase.
•
Mono Case. The printer will print text in uppercase only.
To Next Page
Loading...