InfoPrint 6500 - Page 198

198
Chapter 4 Emulation Configuration Menu
Character Sets
Specifies a character set on page 197. To use one of these sets, choose the
desired group heading (such as 0862 Hebrew) and press ENTER. Character
sets are shown in detail in the InfoPrint 6500 Line Matrix Printers: ASCII
Programmer’s Reference Manual.
• IBM PC (the default)
• Multinational
• EMCA Latin 1
• DEC Multinational
• OCR A
• OCR B
• 0858 PC Euro Multilingual
• 0862 Hebrew
• 0923 Latin 9 8859-15
• DEC Greek
Print Language
Print language specifies the set of print languages used by the printer.
• IBM PC (the default)
• Multinational
• EMCA Latin 1
• DEC Multinational
Control Code 06
Control Code 06 defines the function of ASCII code hex 06 (ACK).
• 8.0 LPI (the default)
• 10.3 LPI
• 6.0 LPI
Define CR Code (Carriage Return)
This option controls the action of the printer when it receives a Carriage
Return code (hex 0D) from the host computer. If this feature is enabled, each
time the printer receives a Carriage Return, it inserts an additional Line Feed
code (hex 0A) into the data stream. Do not use this feature if the host
computer sends line feeds to the printer.
• CR = CR (the default). Does not insert an extra line feed after each
carriage return.
• CR = CR + LF. Inserts an extra line feed after each carriage return. The
next print position will be print position 1 of the next line.