Entering Program Mode
47
5. PRINTER CONTROL
INTERFACE SELECTION
Moves into the PRINTER
CONTROL menu.
6. PRINTER CONTROL
PRINT DIRECTION
Moves to the PRINT
DIRECTION parameter.
7. PRINT DIRECTION
BIDIRECTIONAL*
Move into the PRINT
DIRECTION menu. The asterisk
(*) shows that this is the active
value.
8. PRINT DIRECTION
UNIDIRECTIONAL
Moves to the next available
option, the UNIDIRECTIONAL
option.
9. PRINT DIRECTION
UNIDIRECTIONAL*
Selects the displayed value. An
asterisk (*) appears indicating
that this choice is now the active
value.
10. Continue this pattern to make all of the changes, using the information in this chapter.
11. To save changes so that they will remain when the printer is reset or powered back on, see
“Saving Your Configuration in a Custom Set” on page 48. If you want to use these values
without saving, continue to the next step.
12. NOT READY Returns the printer to the NOT
READY mode.
13. OPERATOR MENU
LOCKED
Locks Program mode and the
Operator Menu.
14. READY Places the printer in READY
mode, prepared for normal
operation.
Step Key LCD Results Notes
Changing Parameters
To Next Page
Loading...