InfoPrint 6500 - Page 61

61
Quick Setup
(Continued)
Save Current
Values
Change
Power On Set
IGP SFCC
11
7E*
13
1-FF
Custom Set 1*
Custom Set 2
Custom Set 3
Custom Set 4
Custom/Preload Set 5
Custom/Preload Set 6
Custom/Preload Set 7
Custom/Preload Set 8
Factory Default
Custom Set 1*
Custom Set 2
Custom Set 3
Custom Set 4
Custom/Preload Set 5
Custom/Preload Set 6
Custom/Preload Set 7
Custom/Preload Set 8
Active Graphic
Emulation
10
IGP*
Code V
12
To cycle through the menus and its
options, press MENU then:
To enter a menu or select menu options,
press ENTER.
To return to a previous menu level,
press RETURN.
To exit the configuration menus
and return to READY, press START.
↑
Scroll/
Micro
↓
Scroll/
Micro
OR
Darker +6
Darker +5
Darker +4
Darker +3
Darker +2
Darker +1
Normal
Lighter -1
Lighter -2
Lighter -3
Lighter -4*
Lighter -5
Lighter -6
Lighter -7
Lighter -8
Lighter -9
Lighter -10
Ribbon End
Point
Forms
Length
7
Print Quality
7
Margins
9
Left Margin
Right Margin
Top Margin
Bottom Margin
Form Length
9
Funct. of Lines
66 Lines*
(1-192)
Forms Length In Lines
66 Lines*
1-192 Lines
Forms Length In Inches
11.0 Inches*
00.1 - 24 Inches
Forms Length In MM
279.4 MM*
000.1 - 609.6 MM
DP Quality*
Near Letter Quality
OCR A
OCR B
Draft
NLQ San Serif
Form Width
9
Function of CPI
136 Characters*
(1-272)
NOTE:
* = Factory Default
1
If installed.
2
Default if IPDS is not installed.
3
Default if IPDS is installed.
4
If E-Net is selected.
5
If Wireless is selected.
6
If Adapter is selected.
7
If ASCII is selected.
8
If LP+ is selected.
9
If ANSI is selected.
10
If Code V is enabled.
11
If IGP is selected.
12
If enabled.
13
If selected.
Quick Setup Menu