Inovance MD500 Series - Appendix A Parameter Table; Introduction

Appendix. Parameter Table
- 308 -
12
Appendix A Parameter Table
A.1 Introduction
Note
Password protection is available for use with the drive. If this protection has been enabled,
you will need to know the user-dened password before you can edit the function codes
described in this chapter. See
4
.
2
.
6
P
a
s
s
w
o
r
d
S
e
c
u
r
i
t
y
for instructions to set and remove
password protection.
Groups F and A include standard function parameters. Group U includes the monitoring function
parameters and extension card communication parameters.
The parameter description tables in this chapter use the following symbols.
The symbols in the parameter table are described as follows:
Symbol Meaning
☆
It is possible to modify the parameter with the drive in the stop or in the Run status.
★
It is not possible to modify the parameter with the drive in the Run status.
●
The parameter is the actual measured value and cannot be modied.
*
The parameter is a factory parameter and can be set only by the manufacturer.