3. Electrical Installation
- 40 -
The Cable Support Bracket is an optional accessory which provides mechanical support
for input, output and dynamic brake cables and which also provides grounding clamps for
the screen/shield of the cables. Installation of the bracket is shown below.
Table 3-11 Cable support bracket models
Cable Support Bracket Model
Applicable Drive Model
MD500-AZJ-A2T5 MD500T18.5GB-INT
MD500T22GB-INT
MD500-AZJ-A2T6 MD500T30GB-INT
MD500T37GB-INT
MD500-AZJ-A2T7 MD500T45GB-INT
MD500T55GB-INT
MD500-AZJ-A2T8 MD500T75GB-INT
MD500T90G-INT
MD500T110G-INT
MD500-AZJ-A2T9 MD500T132G-INT
MD500T160G-INT
To Next Page
Loading...
