Functional Architecture Intel® 5000 Series Chipsets Server Board Family Datasheet
Revision 1.1
Intel order number D38960-004
20
2.4.11 SATA RAID Functionality
See the server or workstation Technical Product Specification that applies to your product for
information.
2.4.12 Serial Attached SCSI
See the server or workstation Technical Product Specification that applies to your product for
information.
2.4.13 Video Controller
See the server or workstation Technical Product Specification that applies to your product for
information.
2.4.14 Network Interface Controller (NIC)
The Intel
®
server boards that use this chipset supports two 10Base-T / 100Base / 1000Base-T
network interface controllers (NIC) based on the Intel
®
82563EB controller. The Intel
®
workstation boards that use this chipset support one 10Base-T / 100Base / 1000Base-T
network interface controller (NIC) based on the Intel
®
82564EB controller.
Each network interface controller (NIC) drives two LED’s located on each network interface
connector. The link/activity LED (to the left of the connector) indicates network connection when
on, and Transmit/Receive activity when blinking. The speed LED (to the right of the connector)
indicates 1000-Mbps operation when amber, 100-Mbps operation when green, and 10 Mbps
when off. The table below provides an overview of the LED’s.
Table 2. NIC2 Status LED
LED Color LED State NIC State
Off 10 Mbps
Green 100 Mbps
Green/Amber (Left)
Amber 1000 Mbps
On Active Connection
Green (Right)
Blinking Transmit / Receive activity
2.4.15 USB Support
The USB controller functionality integrated into the Intel
®
631xESB / 632xESB I/O Controller
Hub ICH6 provides the server board with the interface for up to eight USB 2.0 ports. One
internal USB 2.0 port is provided to support a USB internal floppy disk drive. One internal 1x10
header is provided to support an additional two optional USB 2.0 ports. USB 2.0 ports are
routed through the bridge board connector for optional front access.
To Next Page
Loading...
Need help?
General
