Intelbras TI 5000 - Always Forward; Direct External Call Forwarding; Padlock

73
7.6. Always forward
Options for this menu:
» Always to extension: ll in the number of the desired extension.
» Always to external number: select the Route and ll in the eld with the desired external number.
» Always to VoIP: ll in the eld with the desired VoIP number.
» Always to group: choose the extension’s group number.
» Always to voice mail: press the Ok key to conrm. A conrmation message will be displayed.
» Cancel forwarding always: a conrmation message will be displayed. Press the Ok selection key to conrm the
programming.
7.7. Direct external call forwarding
The terminal can be blocked from receiving external calls directly through DDR or auto attendant. In the case of not
accepting them, you can program a forwarding to an extension or external number.
Options for this menu:
» If busy to extension: choose the extension number.
» If busy to external number: select the route and ll in the eld with the desired external number.
» If busy to VoIP: ll in the eld with the desired VoIP number.
» If busy to extension group: choose the extension’s group number.
» If busy to voice mail: press the Ok key to conrm.
» Cancel direct external call forwarding: a conrmation message will be displayed. Press the Ok selection key to
conrm the setting.
7.8. Padlock
The terminal can be programmed not to make external calls, blocking the selected type of call (landline or mobile).
The extension with the programmed padlock feature will receive an internal dial tone with warning (continuous tone
followed by beeps every second).
To program any type of padlock:
1. Press the Menu key. The terminal will enter the main menu;
2. Search for Features and press the Ok key;
3. Search for Padlock using the and  keys and press the Ok key;
4. Search for the desired padlock option:
» DDI Padlock.
» DDD Padlock.
» Regional Padlock.
» Local Padlock.
» DDI Cell Phone Padlock.
» DDD Cell Phone Padlock.
» Regional Cell Phone Padlock.
» Local Cell Phone Padlock.
» Total Padlock.
» Cancel All Padlocks.
5. For each of the options, except the last, you can choose between Enable or Disable the lock by positioning the cursor
with the keys and pressing the Ok key. After the option, the screen returns to the choice of another padlock typeo;
6. To cancel all padlocks, select the Cancel all padlocks option and press the Ok selection key to conrm the setting.
Note: The padlock can be enabled and disabled through a programmable key on the terminal, congured to do so.
In this case, only the total option is executed and if Extension Password programming is active, the password will be
requested.