43
3. Connect the single end of the three-part cable to the transmitter. Connect the three-part cable to
the keyboard, mouse, and video ports.
Video Port
Mouse Port
Keyboard
Port
4. Connect the two UTP cables to the transmitter and to the receiver.
Refer to the documentation delivered with the PC Extender for additional instructions.
InterRAID-8 Cables
PCI slots on the back of the base unit are numbered from left to right, starting with 12 and counting
down.
To connect the InterRAID-8 cables:
1. Connect the RAID SCSI cables to the InterRAID-8 SCSI ports.
2. Connect the RAID SCSI cables to the RAID controller SCSI ports in slot 5 of the base unit. The
cable connecting to the top RAID controller port attaches to the left port on the InterRAID-8. The
cable connecting to the bottom RAID controller port attaches to the right port on the InterRAID-8.
NOTE The RAID controller in slot 4 connects to the internal RAID section of the base unit. Do not connect
external cables to this controller.
To Next Page
Loading...