36
StudioZ RAX Base Unit
Two boxes are included with the base unit: one for the keyboard, and one for software media and
miscellaneous parts. The software media and miscellaneous parts box contains the following items:
u
Mouse
u
Two cable handlers
u
Screws and tinnerman nuts
u
Keys for internal RAID section and base unit
u
Power cord
u
Loopback VGA cable
u
Windows NT operating system kit (software and documentation)
u
Windows NT Service Pack 4 (CD-ROM)
u
Intergraph system software required to configure or re-install the operating system (diskettes)
u
Intergraph StudioZ RAX System Introduction (diskette)
NOTE The operating system is pre-installed on the fixed disk drive underneath the CD-ROM drive.
WARNING The base unit is very heavy and bulky. Two people must lift the base unit when removing it from
the pallet and installing it into the rack.
To install the base unit into the rack:
1. Place the pallet close to the rack.
To Next Page
Loading...