Intergraph StudioZ RAX - Introduction; Restrictions; Conventions; Additional System Information

ix
Introduction
This System Reference provides the information necessary to service InterServe 650, 660, and StudioZ
RAX systems.
Restrictions
This document is restricted for use by qualified personnel. In the opening, upgrading, and servicing
instructions, heed all warnings and cautions. Personal injury and damage to equipment can occur if
documented procedures are not followed.
WARNING The system produces high-leakage current. Flip the circuit breaker to the OFF position when
servicing or upgrading the base unit.
CAUTION Use an antistatic wrist strap for all servicing procedures to avoid the possibility of electrostatic
discharge.
Conventions
Bold
Commands, words, or characters that you key in literally.
Italic Variable values that you supply, or cross-references.
Monospace
Output displayed on the screen.
SMALL CAPS Key names on the keyboard, such as D, ALT or F3. Names of files and
directories. You can type filenames and directory names in the dialog boxes
or the command line in lowercase unless directed otherwise.
CTRL+D Press a key while simultaneously pressing another key; for example, press
CTRL and D simultaneously.
Additional System Information
A System Setup is shipped with each system, and provides detailed information about:
u Configuring the operating system and associated system software.
u Using the system.
u Using the AMIBIOS Setup program.
u Installing system software.
A System Introduction is delivered with the system, and provides information about:
u Intergraph Support
u System hardware features
u Available hardware options