Interlogix Advisor Advanced ATS2000A-MM - Page 267

Advisor Advanced ATSx000A(-IP) Installation and Programming Manual 257
6 Outputs and filters
6.1 Condition filters
6.2 Outputs
6.1.n Select filter
6.2.0 Add output
6.1.n.1 Filter name
6.2.n Select output
6.1.n.2 Formula
6.2.n.1 Output name
6.1.n.2.0 Add event
6.2.n.2 Output location
6.1.n.2.x Select event
6.2.n.3 Invert output
6.1.n.2.y Select operator
6.2.n.4 Start filter
6.2.n.5 Stop filter
6.1.n.3 Invert
6.2.n.6 Mode
6.2.n.7 Parameters
6.2.n.7.1 Delay time
6.2.n.7.2 Active time
6.2.n.7.3 Retriggerable
6.3 Triggers
6.2.n.8 Log limit
6.3.0 Add trigger
6.2.n.9 Delete output
6.3.n Select trigger
6.3.n.1 Trigger name
6.3.n.2 Delete trigger
7 Calendar
7.1 View
7.1.1 Current view
7.1.2 Date view
7.2 Actions
7.2.0 Add action
7.2.n Select action
7.2.n.1 Action name
7.2.n.4 Function
7.2.n.2 Start time
7.2.n.5 Action filter
7.2.n.3 Active
7.2.n.6 Delete action
7.3 Action lists
7.3.0 Add action list
7.3.n Select action list
7.3.n.1 Action list name
7.3.n.3 Actions
7.3.n.2 Active
7.3.n.4 Delete action list
7.4 Exceptions
7.4.0 Add exception
7.4.n Select exception
7.4.n.1 Exception name
7.4.n.6 Substitute
7.4.n.2 Start date
7.4.n.7 Active
7.4.n.3 Stop date
7.4.n.8 Actions
7.4.n.4 Year
7.4.n.9 Action lists
7.4.n.5 Week days
7.4.n.10 Delete exception
7.5 Schedules
7.5.n Select schedule
7.5.n.1 Schedule name
7.5.n.5 Week days
7.5.n.2 Active
7.5.n.6 Exceptions
7.5.n.3 Start date
7.5.n.7 View
7.5.n.4 Stop date
