Chapter 3 — Replacing Parts
82 EasyCoder PD41/PD42 Printer Service Manual
Upgrading Firmware
The Intermec website at www.intermec.com contains the latest firmware
versions that you can download for free.
To download firmware updates
1 Go to www.intermec.com.
2 Click Support > Downloads.
3 In the Select a Product field, choose EasyCoder PD41 or PD42. The
Downloads page appears with a list of available firmware.
4 Download the latest firmware version to your computer.
5 Extract the zip file to a folder on your computer. Normally, three
versions of the firmware are included with the following differences and
naming convention:
• No suffix: Normal firmware upgrade.
• FD suffix: Firmware upgrade resetting Factory Default. Only
applicable when upgrading through a Compact Flash card.
• NU suffix: Boots with new firmware, yet printer returns to previous
firmware version on reboot (No Upgrade). Only applicable when
upgrading through a Compact Flash card.
To install the downloaded firmware on your printer, use any one of the
following methods:
• Use PrintSet 4 and follow the firmware upgrade procedure.
• If you have a network connection, browse to the printer’s home page
and select Maintenance. Upload the firmware file.
• Copy the firmware binary file to a CompactFlash card. Turn the printer
off, insert the card into the printer’s CompactFlash socket and switch on
the printer. The printer will be upgraded automatically.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
