Invacare Spree XT - Stability - All Models; Stability - All Models Except Recliners

SECTION 1—GENERAL GUIDELINES
Part No 1118364 17 Spree XT
Stability - All Models
Thebackheight,seatdepth,backangle,seatingsystem,tiltangle,seatheight,
size/positionoftherearwheels,size/positionofthefrontcasters,aswellastheuser
conditiondirectlyrelatetothestabilityofthewheelchair.Anychangetooneorany
combinationofthe11maycausethewheelchairtodecreaseinstability.These
adjustmentsMUSTbeperformedbyaqualifiedtechnician.
ALWAYSmakesurethatthewheelchairisstableBEFOREusingthetilt‐in‐space.
Stability - All Models Except Recliners
Tomaintainmaximumstability,positiontherearwheelaxlemountingbracketsinthe
mostrearwardposition.Movingtherearwheelstoanyoftheothermountingpositions
causesthewheelchairtodecreaseinstability.
Ifmovingtherearwheelaxlemountingbracketstoanyforwardposition,ensurethe
wheelchairisstable
beforeusing.
ALWAYSensurestabilitybeforeusingmaximumamountoftilt‐in‐spaceormovingthe
rearwheelaxlemountingbracketsforward.Testwheelchairbeforeitisoccupiedbythe
endusertoensuresafety.
NOTE:Whenchanges
tothelefthandcolumn
occur,followacrossthe
chartandrefertothe
X
proceduretomaintain
theproperstability,
safetyandhandlingof
thewheelchair.
BACK HEIGHT
SEAT DEPTH
BACK ANGLE
SEATING SYSTEM
TILT ANGLE
CASTER SIZE
CASTER POSITION
WHEEL SIZE
WHEEL POSITION
USER CONDITION
WHEEL LOCKS
ANTI-TIPPERS
LOCKING COLLAR
BACK HEIGHT • XXXXXXXXN/AN/AN/AN/A
SEAT DEPTH X • X X N/A X X X X N/A N/A N/A X
BACK ANGLE X X • X X X X X X N/A N/A N/A X
SEATING SYSTEM XXX • XXXXXXN/AN/AX
TILT ANGLE N/A N/A X N/A • N/A N/A N/A N/A N/A N/A N/A X
CASTER SIZE X N/A X N/A N/A • X X X N/A X X X
CASTER POSITION X N/A X N/A N/A X • X X N/A X X X
WHEEL SIZE X N/A X N/A N/A X X • X N/A X X X
WHEEL POSITION X N/A X N/A N/A X X X • N/A X X X
USER CONDITION XXXXXXXXX •N/AN/AN/A
SEAT HEIGHT XN/AXXXXXXXN/AXXX