INVT IPE300 Series - Page 113

IPE300 series engineering VFD Basic operation guidelines
-102-
Function
code
Name
Description
Default
(F3-Er)
63: Communication timeout of the card at
slot 1 (C1-Er)
64: Communication timeout of the card at
slot 2 (C2-Er)
65: Communication timeout of the card at
slot 3 (C3-Er)
66: EtherCAT communication fault (E-CAT)
67: Bacnet communication fault (E-BAC)
68: DeviceNet communication fault
(E-DEV)
69: CAN slave fault in master/slave
synchronization (S-Err)
70: PT100 overtemperature (OtE1)
71: PT1000 overtemperature (OtE2)
72: Brake feedback signal error (E-brF)
73–79: Reserved
P07.33
Running frequency at present
fault
0.00Hz
P07.34
Ramp reference frequency at
present fault
0.00Hz
P07.35
Output current at present fault
0V
P07.36
Output current at present fault
0.0A
P07.37
Bus voltage at present fault
0.0V
P07.38
Max. temperature at present
fault
0.0°C
P07.39
Input terminal status at
present fault
0
P07.40
Output terminal status at
present fault
0
P07.41
Running frequency at last
fault
0.00Hz
P07.42
Ramp reference frequency at
last fault
0.00Hz
P07.43
Output voltage at last fault
0V
P07.44
Output current at last fault
0.0A