INVT IPE300 Series - Page 172

IPE300 series engineering VFD Function parameter list
-161-
Function
code
Name
Description
Default
Modify
P08.34
FDT2 electrical
level detection
value
is invalid only when the output frequency
decreases to a value lower than the
frequency corresponding to (FDT electrical
level—FDT lagging detection value).
Time t
Output frequency f
FDT level
FDT lag
Y1,
RO1, RO2
Time t
P08.32 setting range: 0.00Hz–P00.03 (Max.
output frequency)
P08.33 setting range: 0.0–100.0% (FDT1
electrical level)
P08.34 setting range: 0.00Hz–P00.03 (Max.
output frequency)
P08.35 setting range: 0.0–100.0% (FDT2
electrical level)
50.00Hz
○
P08.35
FDT2 lagging
detection value
5.0%
○
P08.36
Detection value
for frequency
being reached
When the output frequency is within the
detection range, the multifunction digital
output terminal outputs the signal of
"Frequency reached".
Y,
RO1, RO2
Output frequency
Set
frequency
Detection amplitude
Time t
Time t
Setting range: 0.00Hz–P00.03 (Max. output
frequency)
0.00Hz
○
P08.37
Enabling
energy-consump
tion braking
0: Disable
1: Enable
1
○