Wireless Access Point
User Guide
Parameter description
Parameter Description
Deployment
It specifies the deployment mode of the AP. The default option is Local.
−
Local: It indicates that the AP can be managed only through the AC
connected to the same local network.
−
Cloud: In this mode, the AP can be managed only by a cloud AC or a
cloud server. To adopt the cloud deployment mode, you should set
the device name, cloud AC address, cloud AC manage port and
cloud AC upgrade port for your AP as well.
Device Name
It specifies the device name of the AP. You are recommended to change
the device name so that you can quickly locate the AP when managing
the AP remotely.
Cloud AC Address
It specifies the WAN IP address of the router to which the cloud AC
connects, or the domain name to which the router’s WAN IP address is
bound.
Cloud AC Manage
Port
It specifies port of the egress router to which the cloud AC connects for
managing this device.
Cloud AC
Upgrade Port
It specifies port of the egress router to which the cloud AC connects for
upgrading this device.
94
To Next Page
Loading...
