When the AP reboots, all connections are released. You are recommended to reboot the AP in
spare time.
10.7.1 Manual reboot
If a setting does not take effect, you can try rebooting the AP to resolve the problem.
Procedures:
1. To access the page, click Tools > Reboot Device.
2. Click Reboot.
---End
10.7.2 Reboot schedule
This function enables the AP to reboot automatically as scheduled. You can use this function
to prevent wireless performance degradation or network instability that occurs after AP is
online for a long time. The AP can reboot:
− At intervals: In this mode, the AP reboots at the interval you set.
− At specified time: In this mode, the AP reboots regularly at the time you set.
Configuring the AP to reboot at an interval
1. Click Tools > Reboot Device and click the Reboot Schedule tab.
2. Tick the Enable Reboot Schedule box.
109
To Next Page
Loading...
