Wireless Access Point
User Guide
10.3 Logs
This module enables you to view logs and configure log settings.
10.3.1 Logs
Logs record various events that occur to the AP and the operations that users perform on
the AP after the AP starts. In case of system faults, refer to the logs during troubleshooting.
To access the page, click Tools > Logs.
To ensure that the logs are recorded correctly, make sure that AP’s system time is correct.
You can correct the system time by clicking Tools > Date & Time > System Time.
To view the latest logs of the AP, click Refresh. To clear the current logs, click Clear.
When the AP reboots, the previous logs are lost. And the AP reboots when one of the
followings happens: the AP is powered on after a power failure; the QVLAN function is
configured; the firmware is upgraded; an AP configuration is backed up or restored or the AP is
restored to factory settings.
100
To Next Page
Loading...
