Wireless Access Point
User Guide
Parameter Description
Hardware Version It specifies the current hardware version number of the AP.
Number of
Wireless Clients
It specifies the number of wireless devices connected to the AP
currently.
MAC Address
It specifies the physical address of the AP’s LAN port. If you connect the
AP to other devices using Ethernet cables, the AP uses this MAC address
to communicate with those devices.
IP Address
It specifies the AP’s IP address used to log in to its web UI. If you want
to change the IP address, access the Network Settings > LAN Setup
page and perform according to the on-screen instructions.
Subnet Mask It specifies the subnet mask of the AP’s IP address.
Primary DNS
Server
It specifies the primary DNS server of the AP.
Secondary DNS
Server
It specifies the secondary DNS server of the AP.
17
To Next Page
Loading...
