WPA/WPA2-PSK, this parameter has the AES, TKIP, and TKIP&AES
values.
−
AES: It specifies the Advanced Encryption Standard.
−
TKIP: It specifies the Temporal Key Integrity Protocol. If TKIP is
used, the maximum wireless throughput of the AP is limited to 54
Mbps.
−
TKIP&AES: It specifies that both the TKIP and AES encryption
algorithms are supported. Wireless devices can connect to the WiFi
network corresponding to the selected SSID using TKIP or AES.
Key
It specifies a pre-shared WPA key. A WPA key can contain 8 to 63 ASCII
characters or 8 to 64 hexadecimal characters.
Key Update
Interval
It specifies the automatic update interval of a WPA key for data
encryption. A shorter interval results in higher data security. The value 0
indicates that a WAP key is not updated.
WPA and WPA2
Parameter description
Parameter Description
Security Mode
The WPA and WPA2 options are available for network protection with a
RADIUS server.
−
WPA: It indicates that the WiFi network corresponding to the
selected SSID is encrypted using WPA.
−
WPA2: It indicates that the WiFi network corresponding to the
selected SSID is encrypted using WPA2.
41
To Next Page
Loading...
