Wireless Access Point
User Guide
---End
Parameter description
Parameter Description
WMM Settings
−
Enable: It is used to enable the WMM function.
−
Disable: It is used to disable the WMM function.
Optimization
Mode
It specifies the WMM optimization modes supported by the AP:
−
Optimized for scenario with 1 - 10 users: If 10 or less devices are
connected to the AP, you are recommended to select this mode to
increase device throughput.
−
Optimized for scenario with more than 10 users: If more than 10
devices are connected to the AP, you are recommended to select
this mode to ensure device connectivity.
−
Custom: This mode enables you to set the WMM EDCA parameters
for manual optimization.
No ACK
This item appears only after you set your Optimization Mode as Custom.
−
If the box is ticked, the No ACK policy is adopted.
−
If the box is unticked, the Normal ACK policy is adopted.
EDCA Parameters For details, refer to section 7.5.1 Overview.
75
To Next Page
Loading...
