ISCO 4210 - Setting Preferences for Flash Update

4210 Flow Meter
Section 5 Maintenance and Service
5-8
Figure 5-3 Flash Update: File Selection
The window in Figure 5-3 above appears only when the directory
or disk contains more than one version of the update files and the
Preferences option for Show Update File is “All Update Files.” It
lists the update files in the directory. The first four numbers in
the file name are the instrument’s model number. The numbers
following the “v” are the software version. If several versions
appear in the window, select the file with the highest version
number.
5.3.3 Setting Preferences for
Flash Update
Update has preference settings. To change them:
1. Click CANCEL in the Introduction window.
2. Select Preferences from the Options menu.
Figure 5-4 Flash Update Options Menu
3. Choose from the listed preferences and select OK when
done.
· Select the Com Port you are using for the Computer
Connector Cable.
· Select Newest Version to see only the most recent
update files in a directory: Select All Update Files to
see all update files.
· Select the color scheme that best matches your
monitor.