ISCO 4210 - Flash Update: Minimum Requirements

4210 Flow Meter
Section 5 Maintenance and Service
5-9
Figure 5-5 Flash Update Preferences Window
5.3.4 Flash Update:
Minimum
Requirements
Table 5-1 contains the minimum DOS and computer hardware
requirements for using the Flash update software.
FLOWLINK® is a registered trademark of Isco, Inc.
IBM PC® and DOS® are trademarks of International Business
Machines Corporation.
Microsoft® and Windows® are registered trademarks of
Microsoft Corporation.
Table 5-1 Minimum Requirements for Flash Update
DOS DOS 3.3 or later versions DOS 5.0 or later versions recommended. Microsoft Windows
not required.
CPU
80286, 80386, 80486 IBM PC or compatible. 80386 or 80486 recommended.
(Must operate at 19,200 baud when communicating through
the serial port.)
640 kilobytes RAM (Random Access
Memory), minimum
Serial port For connecting the computer to Isco flow meters, flow log-
gers, or samplers.
Keyboard Any compatible keyboard
Hard disk Not required.
Floppy disk 3
1
/2-inch floppy drive (1.44 MB) At least one floppy disk drive.
Monitor LCD, Gray Scale, Color, or Mono-
chrome
IBM CGA, EGA, or VGA compatible.
Mouse Microsoft
®
-compatible mouse Optional. Mouse recommended.
Cabling
Isco Computer Connect Cable
(9-pin: part #60-2544-044)
(25-pin: part #60-2544-040)
For connecting the computer to flow meters, flow loggers, or
samplers.