4210 Flow Meter
Section 1 Introduction
1-5
type of amplifier, whose gain characteristic is based on a
repeating time interval, is referred to as a ramp-gain
amplifier.
1.6 Software Upgrades 4200 Series Flow Meters can be upgraded without being
returned to the factory or having the EPROM replaced. With
Flash memory, software updates can easily be installed in the
field with a disk, a computer, and a cable. Flash update
instruction can be found in Section 5 Maintenance. For more
information about installing software upgrades in the 4210 Flow
Meter, contact your Isco representative or call the factory.
1.7 Controls, Indicators,
and Connectors
The controls, indicators and connectors of the 4210 Flow Meter
are listed in Table 1-1, with brief descriptions. Refer to Figure 1-3
for a view of the controls and indicators, and Figure 1-4 for a
view of the connectors.
1.8 Technical
Specifications
The technical specifications for the 4210 are found in Table 1-2.
Chart longevity for the 4210 internal printer is found in Table
1-3. Battery life expectancy is in Table 1-4, followed by a section
on making battery calculations.
Note
Various accessories are available for the 4210 Flow Meter.
The part numbers for these items are listed on an Accessory
Parts List, which will be found at the back of Appendix A
Replacement Parts List.
To Next Page
Loading...
