4210 Flow Meter
Section 2 Programming
2-23
Select YES if you want DO/PH to appear in the report. You must
have the appropriate sensor connected to the flow meter. It is
capable of sensing temperature, pH and temperature, and D.O.
(dissolved oxygen) and temperature. The following will appear:
Select YES if you want TEMPERATURE to appear in the report.
Press Enter again and the display will return to the REPORT
SETUP menu:
FLOW METER HISTORY is just off the screen.
This time, select YSI 600. The following will appear:
Press Enter again and the display will return to the REPORT
SETUP menu.
This time, select SAMPLE HISTORY. The following will appear:
Select YES if you want SAMPLE HISTORY to appear in the
report. Press Enter again and the display will return to the
REPORT SETUP menu:
This time, select FLOW METER HISTORY. The following will
appear:
Select YES if you want HISTORY to appear in the report.
HISTORY is a list of the changes that have been made to the flow
meter's program.
Press Exit to leave the program.
2.6.5 Other Setup Options Enter and reselect SETUP. The Setup menu will reappear:
SET CLOCK, SITE ID, MEASUREMENT SETUP, PROGRAM
LOCK, PROGRAM are off-screen and can be accessed with the
arrow keys.
LCD Backlight – Select LCD BACKLIGHT. The following will
appear:
TEMPERATURE IN REPORT
• YES • • NO •
REPORT SETUP
• FLOW • • DO/PH • • YSI 600 • • SAMPLE HISTORY •
YSI DATA IN REPORT
• YES • • NO •
REPORT SETUP
• FLOW • • DO/PH • • YSI 600 • • SAMPLE HISTORY •
SAMPLE HISTORY IN REPORT
• YES • • NO •
REPORT SETUP
• DO/PH • • SAMPLE HISTORY • • FLOW METER HISTORY •
FLOW METER HISTORY IN REPORT
• YES • • NO •
SETUP OPTIONS: 'EXIT' TO QUIT
• STATUS • • REPORT SETUP • • LCD BACKLIGHT •
LCD BACKLIGHT MODE
• KEYPRESS TIMEOUT • • CONTINUOUS • • OFF •
To Next Page
Loading...
