Chapter 6 SETUP MODE
6-73 UNI-3 Service Manual
Specify barcode category.
B10-03
1. Specify start number on receipt of machine in use.
When the receipt number is reset, it will return to this number.
2. Specify the reciept end number, which is the maximum value when the number overflows.
3. Switch when executing auto reset of receipt number. If YES, it will reset every day.
POS FORMAT: Select barcode format when selecting EAN13
1 F2C5pP4d
2 F2C6P4d
3 F1C6pP4d
4 F2C5P5d
5 F1C6P5d
6 F2C4pP5d
7 F2C6W4d
8 F1C6W5d
9 F1C5i6d
10 F2C6P4d*
11 F2C6W4d*
12 F2C4wW5d
13 ----
14 ----
15 F2C5oP4d
16 F2C5W5d
17 F2C5P5/10d
18 F2C5pP4/10d
19 F2C5wW4d
20 F1C5P6d
21 F2C4P6d
22 F1C3W4P4d
23 F2C4Q2P4d
24 F1i6P5d
25 F2i6P4d
26 F1C4P7d
27 F1i6P5/10d
28 F2i6P4/10d
29 F1C6P5/10d
30 F2C6P4/10d
To Next Page
Loading...
Need help?
General
