ISHIDA WM-NANO - Page 118

Chapter 5 Troubleshooting
ID NO. TITLE ERROR CONTENTS SOLUTION
0213 FREE MSG. 2
MASTER ISN’T
PROGRAMMED
Free Message 2 that was called up
is not programmed in the Free
Message 2 master.
Called Free Message 2 No. does not
exist in the internal memory.
[SET] Æ Only releasing the error
message.
[DELETE] Æ Deletes the Free
Message 2 of the PLU.
0214 FREE MSG.3
MASTER ISN’T
PROGRAMMED
Free Message 3 that was called up
is not programmed in the Free
Message 3 master.
Called Free Message 3 No. does not
exist in the internal memory.
[SET] Æ Only releasing the error
message.
[DELETE] Æ Deletes the Free
Message 3 of the PLU.
0215 FREE MSG.4
MASTER ISN’T
PROGRAMMED
Free Message 4 that was called up
is not programmed in the Free
Message 4 master.
Called Free Message 4 No. does not
exist in the internal memory.
[SET] Æ Only releasing the error
message.
[DELETE] Æ Deletes the Free
Message 4 of the PLU.
0216 FREE MSG.5
MASTER ISN’T
PROGRAMMED
Free Message 5 that was called up
is not programmed in the Free
Message 5 master.
Called Free Message 5 No. does not
exist in the internal memory.
[SET] Æ Only releasing the error
message.
[DELETE] Æ Deletes the Free
Message 5 of the PLU.
0223 COUPON MASTER
IS NOT
PROGRAMMED
Coupon that was called up is not
programmed in the Coupon master.
Called Coupon No. does not exist in
the internal memory.
[SET] Æ Only releasing the error
message.
[DELETE] Æ Deletes the Coupon No.
of the PLU.
0224 LABEL SETTING
MASTER IS NOT
PROGRAMMED
Label No. that was called up is not
programmed in the Label setting
master.
Called Label No. does not exist in
the internal memory.
[SET] Æ Only releasing the error
message.
[DELETE] Æ Deletes the Free
Message 4 of the PLU.
0226 AMOUNT OF
INTERNAL MEMORY IS
SHORT
Amount of internal memory does not
enough room.
-When showing the lists, the
machine failed to reserve the
memory for the list data.
-Full-Memory Error at database
occurred.
[OK]
0227 AMOUNT OF
INTERNAL MEMORY
FOR TOTAL IS FULL
Amount of internal memory for the
total becomes full.
Since the data for TOTAL is full, it
could not add new record.
Full-Memory Error at database
occurred when the machine tried to
add new TOTAL record.
[OK]
5-6