ISHIDA WM-NANO - Machine Shut-Down Procedures; Pre-Shutdown Checks; Powering Off; Seal Heater Cooling

Chapter 2 Functions for Each Mode
2.1.2 How to Use Preset Keys
The following preset keys are available after connecting to WM-NANO.
TRAY No. / WRAP ADJUST / CLEANING / HEATER ADJUST / WRAP STATUS / WRAP MODE /
VOLUME / FILM REMOVE / FILM FEED / RETURN /
●TRAY No
Enter a tray number and touch the [TRAY No.] preset key.
A screen for the specified tray appears.
If no tray number is entered, the tray list screen appears.
●WRAP ADJUST
Touch the [WRAP ADJUST] preset key.
2-3